FK909 Semi Atomatik Biyu Side Ruwa Labeling Machine
Shari'ar Abokin ciniki:
Siga:
| Siga | Bayanai |
| Ƙayyadaddun Label | m sitika, m ko opaque |
| Yin Lakabi Haƙuri | ± 0.5mm |
| Iyawa (pcs/min) | 15-30 |
| Girman kwalabe (mm) | L: 20 ~ 200 W: 20 ~ 150 H: 20 ~ 320; Za a iya musamman |
| Girman lakabin kwat da wando (mm) | L: 15-200;W (H): 15-180 |
| Girman Injin (L*W*H) | ≈1280*1110*1300(mm) |
| Girman Kunshin (L*W*H) | ≈1350*1180*1350(mm) |
| Wutar lantarki | 220V/50(60)HZ; Za a iya musamman |
| Ƙarfi | 990W |
| NW (KG) | ≈ 140.0 |
| GW(KG) | ≈200.0 |
| Lakabin Roll | ID: Ø76mm; OD: ≤260mm |
| Samar da Jirgin Sama | 0.4 zuwa 0.6Mpa |
Tsarin:
| A'a. | Tsarin | Aiki |
| 1 | Mai jigilar kaya | aika samfur. |
| 2 | Babban Labeling Head | lakabi a saman, ainihin ma'anar alamar, gami da label-iska da tsarin tuki. |
| 3 | Shugaban Lakabi na ƙasa | lakabi a ƙasa, ainihin alamar alamar, gami da label-iska da tsarin tuƙi. |
| 4 | Sensor samfur | gano samfur. |
| 5 | Label-peeling Plate | kwasfa lakabin daga takardar saki. |
| 6 | Goge | m labeled surface. |
| 7 | Kariyar tabawa | aiki da saitin sigogi |
| 8 | Na'urar Ƙarfafawa | Latsa samfurin da aka yiwa lakabi don ƙarfafa lakabin. |
| 9 | Farantin Tari | tattara samfuran da aka lakafta. |
| 10 | Akwatin Lantarki | sanya saitunan lantarki. |
| 11 | Guardrails Side Biyu | kiyaye samfuran tafiya kai tsaye, ana iya daidaita su gwargwadon girman samfurin. |
Siffofin:
1) Tsarin Gudanarwa: Tsarin kula da Panasonic na Japan, tare da babban kwanciyar hankali da ƙarancin gazawa.
2) Tsarin aiki: Allon taɓawa mai launi, ƙirar gani kai tsaye mai sauƙin aiki. Sinanci da Ingilishi akwai.Sauƙi don daidaita duk sigogin lantarki kuma suna da aikin kirgawa , wanda ke taimakawa don sarrafa samarwa.
3) Tsarin Ganewa: Yin amfani da firikwensin lakabin LEUZE/Italian Datalogic firikwensin da firikwensin samfurin Panasonic na Jafananci, waɗanda ke da kula da lakabin da samfur, don haka tabbatar da daidaito mai tsayi da aikin lakabi.Yana ceton aiki sosai.
4) Ayyukan ƙararrawa: Injin zai ba da ƙararrawa lokacin da matsala ta faru, kamar zubewar lakabin, lakabin karya, ko wasu rashin aiki.
5) Machine Material: The inji da kayayyakin gyara duk amfani da kayan bakin karfe da anodized babban aluminum gami, tare da high lalata juriya da taba tsatsa.
6) A ba da kayan wutan lantarki don dacewa da wutar lantarki na gida